M2C 3473 MOTOR PLATE AND CHASSIS BRACE FOR ARRMA BIG ROCK / GRANITE / SENTON / VORTEKS 3S TRUCKS

73,54

Disponibile su ordinazione

Avvisami quando torna disponibile

COD: M2C3473 Categorie: ,
il miglior prezzo

Descrizione

WE ARE EXCITED TO RELEASE OUR NEWEST PRODUCT FOR THE ARRMA 3S  LINE OF VEHICLES!!!

THE LONG AWAITED 3S CHASSIS BRACE AND MOTOR PLATE!

MADE USING 7075 T6 ALUMINUM, THIS MOTOR PLATE AND CHASSIS BRACE WILL REVOLUTIONIZE THE 3S TRUCKS.

THE MOTOR PLATE M2C PN# 3445 IS ENGINEERED TO STRENGTHEN AND SEAL THE TRANSMISSION CASE WITH THE DUST LIP WE HAVE ADDED.

THIS IS TO KEEP DIRT AND DEBRIS OUT OF THE TRANSMISSION CASE.

IT ALSO HAS INCREASED LENGTH SLIDER SLOTS FOR LARGER MOTORS AND GEARS.

WITH 3MM WASHERS INCLUDED TO AVOID GOUGING THE MOTOR MOUNT PLATE.

M2C PN#3471 IS DESIGNED AND ENGINEERED WITH THE HARDCORE BASHER IN MIND.

MADE FROM 6061 T6 ALUMINUM, THIS PART WILL REPLACE THE CURRENT PLASTIC PIECE AND ADD CONSIDERABLE STRENGTH

IN THE AREA THESE TRUCKS NEED IT THE MOST.

WITH PRECISION CUT FULL SIZE DOVETAILS AND INTERLOCKING DRIVESHAFT LOOP, IT IS THE ULTIMATE IN STRENGTH WHEN SECURED

TO M2C PN# 3445 MOTOR PLATE USING THE INCLUDED M3 X 12 SOCKET HEAD CAP SCREW.

IT IS SECURED TO THE CHASSIS WITH YOUR EXISTING 4MM BOLT AND LOCKNUT.

LOCKTITE ON SCREW FORM BRACE TO PLATE IS STRONGLY RECOMMENDED.

UPDATE.. HOBBYWING 3660 ON 4S HAS BEEN USED WITH THIS COMBO

NOTE:

DUE TO THE DESIGN OF THIS KIT. THE PARTS MUST BE USED TOGETHER.

we see this issue from time to time. but it is not a consistent problem.
All we can determine is since the casings are injected and they have more than 1 pc. in the molds ,it seems that one of the molded parts  is about .01 off on the motor mount.
on all three of our sample parts, the part fits perfect. we also checked our parts to the original motor plate and the 3mm screws all line up perfectly.
It is not uncommon for a part to warp when it comes out of a mold a little. Since the molded parts have a 3mm hole in them. any kind of warpage in the case can throw off a part.
the simplest way to solve the issue if it happens to you  is just drill out the case with a 1/8 drill. this will allow a little play in the case to allow the screws to go in.
This mount will also take the 37mm can.

ASSEMBLY INSTRUCTIONS:
Use the stock 3mm  screws that come with truck.
the (2) 3mm flat washers are used on the motor mount screws to keep the heads from eating into the motor mount bracket.
The drill is included to resize the (3) holes that go thru the rear case to give a little play for the (3) mm screws.

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “M2C 3473 MOTOR PLATE AND CHASSIS BRACE FOR ARRMA BIG ROCK / GRANITE / SENTON / VORTEKS 3S TRUCKS”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *